BP 12 Electric Pump Inflatables SUP

Electric pump designed for inflating inflatable SUP boards.

The Scoprega BP 12 offers an intelligent and effortless solution for inflating your inflatable SUPs.

You can pre-set your desired pressure level, enabling the pump to cease functioning upon reaching that setting. The highest pressure limit is 14.5PSI (1 bar), demanding a 12V DC voltage supply. The air throughput per minute is 42.27 gallons (160 litres).

Included is a valve connector suitable for inflatable SUPs, as well as a bag with a shoulder strap.

Equipped with a 5.58 feet (1.7 meters) hose and a power lead stretching 9.84 feet (3 meters).

This pump is also compatible with inflatable boats and kites.

Instructions:

• Attach the pump using the two crocodile clips to a 12 Volt battery - NOTE: The absence of a 12V accessory socket plug-in (Car Cigarette Lighter plug-in) in this pump kit is due to the pump's elevated power, making it unsuitable for connection via that socket.
• Secure the appropriate valve connector on the hose
• Insert it into the SUP, kite, or boat valve
• Adjust the correct air pressure level on the BP 12 Electric for the item you wish to inflate
• Press the start button
• The pump will automatically halt when the desired air pressure level is achieved

Dimensions:

• 20.5cm x 10.5cm x 13cm