Steps for Installing a Scooter Headset

Require assistance with fitting your scooter headset? Mike from our workshop is ready to provide guidance on the installation of a stunt scooter headset:

• To begin, apply grease to the top of your head tube.
• Do the same at the bottom of the head tube.
• Then, place the top bearing into the head tube with grease.
• Turn the deck to the side and put in the bottom bearing.
• At this point, you can insert the fork.
• Following this, it's necessary to slide the C-ring onto the fork.
• In the final step, attach the top cap.

Your headset is now completely installed!