Guide for Fitting BMX Tyres and Inner Tubes

This video guides you through the process of fitting BMX tyres and an inner tube:

1. Begin with inflating a small amount of air into the inner tube.
2. Pay attention to the wheel’s rotational direction.
3. Proceed by mounting the tyre onto the wheel.
4. Ensure a gap exists between the tyre and the wheel.
5. Afterwards, insert the valve through the opening in the wheel.
6. Install the tube next.
7. Continue with fitting the remainder of the tyre.
8. Verify that the valve remains straight.
9. Attach the pump to the valve.
10. Inflate the tyre to the recommended pressure specified on the tyre.
11. Finally, secure the cap.

Your BMX tyres are now fitted!