Guide to Fitting BMX Cranks

Discover how to fit your BMX cranks by following the straightforward steps in our video:

1. Begin by applying grease to the spindle of your crank and inserting it into the bottom bracket.
2. Use a rubber hammer to tap it into position.
3. Slide the bearing cover on and grease the exposed section of the spindle.
4. Check the space between the crank and your frame. If necessary, add a spacer.
5. Proceed by sliding the crank on and securing it with a greased bolt.
6. Install the additional bearing cover.
7. Then, align the crank with the sprocket so that it matches the first crank.
8. Secure all components together by using another greased bolt.

Your cranks are now installed!