Guide to Fitting Roller Skate Bearings

This video demonstrates the fitting process for bearings into roller skate wheels. All you require is a skate tool, and you’re all set!

Procedure for Fitting Roller Skate Bearings:

Firstly, detach the nut from the axle using a skate tool.
Position two bearings onto the axle.
Place the wheel onto the axle, ensuring the external side faces down. With both hands, press down fully so the initial bearing enters the wheel.
Take the wheel off and place the spacer onto the axle.
Then, flip the wheel and press down again to guarantee the second bearing is completely inserted.

Your bearings are now in place!

Common Questions:

Is it possible to use skateboard bearings on roller skates?

Certainly, skateboard bearings are compatible with roller skates. However, make sure the wheel axles of your roller skates have an 8 mm diameter!

What’s the method for removing bearings from roller skate wheels?

A bearing remover tool or the wheel axle of your roller skates can be utilised.

What is the number of bearings required for roller skates?

To outfit a pair of roller skates, 16 bearings are necessary (2 per wheel).

Are spacers necessary for roller skates?

If your roller skates are primarily for cruising or dancing and you can tighten your wheels correctly without obstructing the bearings, spacers are optional. However, if you engage in aggressive roller skating or if the wheels of your roller skates seize when tightened, spacers are a necessity.